NAS (Network Attached Storage) is a storage system supported by Linux. The operation of this device is based on the simultaneous operation of several hard drives.
Thus, you can work with a large amount of data without slowing down the speed.
US Synology devices can be connected to VyprVPN in two ways: using OpenVPN or PPTP protocols. To connect Synology NAS using OpenVPN, you should follow these steps according to our instructions.
Before installation, please download the OpenVPN certificate from here (right-click the link and select “Save As …”).
How to setup NAS on VyprVPN using OVPN?
Login to your Synology device.
You should now click lick on Control Panel
Click the Network icon
Now click Network Interface
Under the Network Interface tab, select Create, then create VPN profile
You should select OpenVPN in the VPN Connection Method.
In the General Settings window, enter the following information:
Profile name: name of your choice
Server Address: enter the server hostname here
Username: your account
Password: your password
Port: 1194
Protocol: UDP
You should browse to the certificate you downloaded before setup. Select it. Click Next.
Make sure to check the following options:
✓ Enable compression on the VPN link
✓ Use default gateway on remote network
✓ Allow other network devices to connect through this Synology server’s Internet connect
✓ Reconnect when the VPN connection is lost
Click Apply.
Select the profile you have just created. (you can have more than one profile, but you can only be connected to one at a time). Click Connect.
Erstellt am: 03/11/2020